Allied Guppy Скачать руководство пользователя страница 138 | Manualshive

Страница: 138 / 238

Allied Guppy Скачать руководство пользователя страница 138

Video formats, modes and bandwidth

GUPPY Technical Manual

V4.0.1

138

Video formats, modes and bandwidth

The different GUPPY models support different video formats, modes and
frame rates.

These formats and modes are standardized in the IIDC (formerly DCAM) spec-
ification.

Resolutions smaller than the generic sensor resolution are generated from
the center of the sensor and without binning.

GUPPY F-025B / GUPPY F-025C

tbd

GUPPY F-029B / GUPPY F-029C

tbd

Note

L

•

The maximum frame rates can only be achieved with
shutter settings lower than 1/framerate. This means
that with default shutter time of 40 ms, a camera will
not achieve frame rates higher than 25 frames/s. In
order to achieve higher frame rates, please reduce the
shutter time proportionally.

•

Tables assume that bus speed is 400 Mbit/s. With lower
bus speeds (e.g. 200 or 100 Mbit/s) not all frame rates
may be achieved.

«
...
136
137
138
139
140
...
»

Содержание Guppy















































































































































































































































Отзывы:

Нет отзывов