Allied Guppy, Техническое руководство, Страница: 34 / 238

Specifications
GUPPY Technical Manual V4.0.1
34
Guppy F-036B
Feature Specification
Image device MT9V022 (diag. 5.35 mm; type 1/3) progressive scan Micron CMOS
Effective picture elements 752 (H) x 480 (V)
Lens mount C-Mount: 17.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical
flange back to filter distance: 9.5 mm
(see
Figure 25: Guppy C-Mount dimensions (new CS-/C-Mounting)
on page 64)
CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical
flange back distance: 8 mm
(see
Figure 27: Guppy CS-Mount dimensions (new CS-/C-Mounting)
on page 66)
Picture sizes 640 x 480 pixels (Format_0)
752 x 480 pixels (Format_7 Mode_0)
376 x 480 pixels (Format_7 Mode_1, 2 x H-binning average)
752 x 240 pixels (Format_7 Mode_2, 2 x V-binning average)
376 x 240 pixels (Format_7 Mode_3, 2 x full binning average)
188 x 480 pixels (Format_7 Mode_4, 4 x H-binning average)
752 x 120 pixels (Format_7 Mode_5, 4 x V-binning average)
188 x 120 pixels (Format_7 Mode_6, 4 x full binning average)
Cell size 6.0 µm x 6.0 µm
ADC 10 bit
Data path 8 bit
Frame rates 15 fps; 30 fps; 60 fps
variable frame rates in Format_7 from 10 fps up to 64 fps
Gain control Manual: 0-12 dB (average ~0.25 dB/step) for details see Chapter
Manual gain on page 77
Shutter speed 20 µs … ~979 ms
External trigger shutter Trigger_Mode_0, trigger delay
Look-up table One, user programmable (10 bit
Æ
8 bit); gamma (0.5)
Smart functions LUT (look-up table), mirror, binning (average)
one configurable input, three configurable outputs, RS-232 port
(serial port, IIDC V1.3.1)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s
Digital interface IEEE 1394 IIDC V1.3, single port
Power requirements DC 8 V - 36 V via IEEE 1394 cable or 8-pin HIROSE
Power consumption Less than 2 watt (@ 12 V DC)
Table 12: Specification Guppy F-036B