background image

Comfort Sync™ 7-Day Programmable Communicating Thermostat

Page 9

ALERTS

Figure 11 shows how an alert appears when it occurs after the system has
been put into operation. Use information on this screen to contact your
HVAC serviceman. Use the 

X

 to close the alert message and return to the

previous screen.

red alert

 (red icon) identifies a problem that could prevent the system from

working properly or from working at all. If the system is allowed to run after a
red alert has been issued, damage to the system may be caused. 

A red alert

is your signal to call for service immediately.

alerts ( 1) of ( 1)

9:39 am May 23, 2013
Service Alert Code 290 
indoor unit reports:
Heat Problem

service info:

clear

remind

later

Figure 10. Typical Red Alert

service alert 

(yellow icon) tells you to perform routine service, or to call the

dealer to service one or more of the following: Filters, Humidifier Pad, UV
Light, PureAir

t

 Air Purification system and Maintenance. These alerts will

appear based on elapsed time set per the reminders. For information on
clearing a service alert or setting the alert to remind you later, see reminders
on page 11.

alerts ( 1) of ( 1)

9:39 am May 23, 2013
Service Alert Code 3000 
system reports:
Replace Filter 1

service info:

clear

remind

later

Figure 11. Typical Service Alert

ACCESS ALERTS THROUGH THE FEATURES SCREEN

Touch the Home screen alert icon (

) or the 

alerts

 button on the

FEATURES 

screen (see figure 3). Any alerts will appear similar to those

shown in figure 12. Touch the 

select alert time period for viewing

 button to

view alerts that occurred in the last 24 hours, last 30 days, or last 12 months.
Contact your HVAC serviceman to report the alerts and related problems.

ALERT (1) of (1)

02/23/2012

9:39 am

Service Alert Code: 292
Indoor unit reports:
Problem

ALERT (1) of (1)

02/23/2012

9:39 am

Service Alert Code: 331
Indoor unit reports:
RSBCommunication Link Problem

ALERT (1) of (1)

02/23/2012

9:39 am

Service Alert Code: 252
Indoor unit reports:
Discharge Air Temperature High

service info:

last 24

hours

select alert

time period for

viewing

last 24 hours

last 30 days

last 12 months

9:39 am May 23, 2013

Wi-Fi

?

Figure 12. Alerts Viewed from FEATURES Screen Option

Содержание Comfort Sync

























Отзывы: