507176-01
Page 14
Adjusting Room Temperature, Away Mode, Program Change, Clock and Weather
Adjust temperature when programming is OFF
—
When the
programming is OFF, the system mode button (shown in figure 19, labeled
heat or cool
) indicates a manual mode (no mention of “program”). In this
mode, touch one of the two
set temp
buttons to change the temperature
setting. The up/down arrows appear, allowing you to adjust the “cool to” (or
“heat to”) values to the desired temperature setting.
This setting will remain until you decide to change it again. (The inset shows
an alternate configuration of button layout in non-program mode.)
use arrows
to change
temperature
?
touch
cool-to
button
indoor temperature
indoor humidity is 41%
fan is
OFF
fan is
AUTO
cool-to
set temp
75
heat to
70
heat
or
cool
fan is
AUTO
system is cooling
alternate
cool-only button
layout
(mode
button)
9:39 am May 23, 2013
Wi-Fi
enter
away
cool-to
set temp
75
cool
only
fan is
AUTO
?
Figure 19. Adjusting Temperature with NO Program Running
Away Mode (Vacation)
—
The
enter away mode
button on the home
screen (upper right-hand corner) sets the system for manual operation and
allows you to set the thermostat for energy-saving operation while you are
gone for an extended period of time. In this mode, the system will only come
on if the indoor temperature falls below a set value in the heating mode (62º F
default), or if the indoor temperature rises above a set value in the cooling
mode (85º F default). You may adjust these settings as desired (see figure
20). To exit the away mode, touch
cancel away mode
.
indoor temperature
9:39 am May 23, 2013
cool-to
set temp
82
heat to
60
use arrows to
change
temperature
?
9:39 am May 23, 2013
Wi-Fi
cancel
away
system is currently using energy saving AWAY settings
?
Figure 20. Adjusting Temperature with Program Running
(Away Mode)
Turn Programming ON
—
If the programming is OFF, touch the
system mode button (shown in figure 21, labeled
heat or cool
) to open the
manual settings menu.
Programs
is the final selection in this menu. Select
programs
to display the program settings menu. (The menu will disappear if
you don't make a selection within a few seconds). Select an option (e.g.
spring/fall
). The system mode button will display the selected program (e.g.
spring...program is ON
).
Turn Programming OFF
—
If the programming is ON, touch the
system mode button (e.g.
spring...program is ON
) to return to manual
mode. The program settings menu includes an option for manual. Select
manual
to display the manual settings. Select one of the manual settings
(e.g.
heat only
). After the selection is made, the system mode button will
display the selected manual option (e.g.
heat only
).
