Comfort Sync™ 7-Day Programmable Communicating Thermostat
Page 17
Setting Humidity Controls
NOTICE
Humidifier and dehumidifier controls must be set up by the installer or
these controls will not be visible. If your system has one or both of
these features and the controls are not visible, contact your Allied
dealer for proper setup.
If the controls have been set up, they will appear and will be ON.
Humidification and Dehumidification Settings
: To adjust humidification
settings, touch the
button to go to the FEATURES screen; then select the
system
settings
button. Some systems may have a humidifier and some
may have a dehumidifier. Some systems will have both (as shown in figure
27). You can control either or both from this screen.
Humidification Settings (Settings present only if humidifier is
installed)
: Touch the humidifier setting button you want to adjust. If it says
humidifier is OFF, one touch will change it to ON and bring on the
set-to
button. When you touch the
set-to
button, the arrows appear, allowing you to
change the humidity setting to the desired value.
Dehumidification Controls
: Touch the humidifier setting button you want
to adjust. If it says de-humidifier
OFF
, one touch will display a selection for
OFF
,
MEDIUM
and
HIGH
. Select
MEDIUM
or
HIGH
to bring on the
set-to
button. When you touch the
set-to
button, the arrows appear, allowing you to
change to the desired humidity setting.
Three climate settings are available:
OFF
The system supplies higher indoor airflow at all compressor
capacities. This will increase efficiency by operating at a higher
sensible-to-total ratio.
MEDIUM
The system controls indoor airflow to ensure balanced
efficiency and comfort.
HIGH
The system lowers the indoor airflow at all compressor
capacities. This setting improves humidity removal by operating at a
lower sensible-to total-ratio.
Remember that the humidification controls are only active while the system
is in the heating mode. The dehumidification controls are only active while in
the cooling mode.
SYSTEM SETTINGS
current indoor humidity is 50%
humidifier
is ON
de-
humidifier
MEDIUM
40
%
set to
50
%
set to
ALL CHANGES MADE ON
THIS SCREEN ARE IN
STANTLY SAVED.
9:39 am May 23, 2013
Wi-Fi
OFF
MEDIUM
HIGH
humidity
display
is ON
(default is ON)
humidification
settings
dehumidification
settings
?
Figure 27. Humidity Controls
