Allied AutoLube II, Техническое руководство

Страница: 5 / 28

SECTION 1.0
INTRODUCTION
This manual contains important informa-
tion for the safe use and maintenance of
the Allied AutoLube II. Read this manual
thoroughly before installing, operating or
servicing the AutoLube II. This manual
must be easily accessible to operators and
service personnel. Store this manual in a
convenient location.
~
Instructions identified with this sym-
bol are important for personnel safety and
full service life of the AutoLube II. Follow
them carefully.
~
WARNING
Instructions given inside a WARNING
box emphasize a potentially dangerous
procedure which may result in injury or
death to the operator or any bystanders
in the work area. Please read and fol-
low these instructions carefully and
heed all decals.
~
CAUTION
Instructions given inside a CAUTION box
emphasize a procedure that may cause
damage to the equipment if not per-
formed properly. Read these instruc-
tions carefully before performing the
procedure on the Allied AutoLube II
Lubrication System.
This technical manual describes in detail
the procedures needed to operate the Allied
AutoLube II Lubrication System. Pay care-
ful attention to all instructions and follow
all governing regulations. Operation or
service other than in accordance with these
instructions may subject the AutoLube II
to conditions beyond its design capability.
Improper operation, service or the use of
non-Allied parts may result in AutoLube II
failure or personnel injury.
Responsibility for operation and safety lies
at all times with the operator of the carrier.
Allied takes no responsibility for the fol-
lowing:
·
Incorrect usage of the Autolube II.
·
Improper handling of the Autolube II.
·
Inadequate maintenance of the
Autolube II.
·
Use of non-Allied spare parts.
Allied provides no warranty for the follow-
ing wear parts:
·
All seals
·
O-rings
·
Seal collar
·
Hoses
A
llied
AutoLube II
11/1/03 1