Pike Technical Manual
V5.2.0
221
Controlling image capture
Manual stepping & reset (new for 3.x)
With firmware 3.x a sequence can be stepped further with a software command.
To use manual stepping use stepping mode 0x82 or 0x84, but do not setup any
input pin for external sequence stepping.
Every time the
PerformStep
flag is set the sequence will be stepped one param-
eter set further. Manual stepping observes the repeat counter also.
For some application it could be useful to reset the sequence during runtime.
Simply set the
PerformReset
flag to one: the sequence starts over with the very
first parameter set.