Pike Technical Manual
V5.2.0
50
Specifications
Pike F-210B/C (fiber)
Feature
Specification
Image device
Type 1 (diag. 16.3 mm) type progressive scan KODAK IT CCD
KAI-2093A/C with HAD microlens
Effective chip size
14 mm x 8.0 mm
Cell size
7.4 μm x 7.4 μm
Picture size (max.)
1920 x 1080 pixels (Format_7 Mode_0)
Lens mount
Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
mechanical flange back to filter distance: 12.5 mm
(see
Figure 34: Pike C-Mount dimensions (large filter)
ADC
14 bit
Color modes
Only color:
Raw8, Raw12, Raw16, Mono8, YUV422, YUV411, RGB8
Frame rates
1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps
up to 31 fps in Format_7 (Mono8, no sub-sampling)
Gain control
Manual: 0-22 dB (0.0353 dB/step); auto gain (select. AOI)
Shutter speed
43
μs … 67,108,864 μs (~67s); auto shutter (select. AOI)
External Trigger Shutter Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Internal FIFO memory
Up to 15 frames
Look-up tables
16 user-defined (14 bit
14 bit); gamma (0.45 and 0.7)
Smart functions
AGC (auto gain control), AEC (auto exposure control), real-time shading correc-
tion, LUT, 64 MByte image memory, mirror, binning, sub-sampling, High SNR, stor-
able user sets
only color:
AWB (auto white balance), color correction, hue, saturation, sharpness
Two configurable inputs, four configurable outputs
RS-232 port (serial port, IIDC V1.31)
Transfer rate
100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Digital interface
IEEE 1394b (IIDC V1.31), 2 x copper connectors (bilingual) (daisy chain)
fiber
: IEEE 1394b, 2 connectors: 1 x copper (bilingual), 1 x GOF connector (2 x opti-
cal fiber on LCLC), (daisy chain)
Power requirements
DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE
Power consumption
Typical 5.5 W (@ 12 V DC);
fiber:
typical 6.25 W (@ 12 V DC)
Dimensions
96.8 mm x 44 mm x 44 mm (L x W x H); incl. connectors, without tripod and lens
Mass
250 g (without lens)
Operating temperature
+ 5 °C ... + 50 °C housing temperature (without condensation)
Storage temperature
- 10 °C ... + 70 °C ambient temperature (without condensation)
Regulations
CE, FCC Class B, RoHS (2002/95/EC)
Table 11: Specification Pike F-210B/C (fiber)