Pike Technical Manual
V5.2.0
18
Introduction
continued from previous page
V4.1.0
[continued]
20.08.08
[continued]
[continued: Restructuring of Pike Technical Manual:]
Corrected for all Pike cameras: 16 user-defined LUTs in Chapter
Added cross-reference from
upload LUT
to
GPDATA_BUFFER
in
Loading an LUT into the camera
Added cross-reference from
upload/download shading image
to
GPDATA_BUFFER
in:
Loading a shading image out of the camera
Loading a shading image into the camera
Added Pike F-505 as it uses different BAYER pattern (first pixel of
the sensor is RED) in Chapter
Color interpolation (BAYER demo-
Added detailed level values of I/Os in Chapter
Added RoHS in Chapter
Added little endian vs. big endian byte order in Chapter
Pike update firmware round:
Gain references: see Chapter
User adjustable gain references
Low-noise binning mode for 2 x horizontal binning: see Chapter
Low-noise binning mode (only 2 x H-binning)
New photo of LED positions in
Figure 58: Position of status LEDs
V4.2.0
01.09.08
New default gain references for Pike F-505B/C in
Default gain references of Pike models
to be continued on next page
Version
Date
Remarks
Table 1: Document history