Allied Telesis Rapier i AT-RP16Fi/SC, Руководство пользователя

Страница: 13 / 123

Chapter 2
Getting Started with the Command Line
Interface (CLI)
This Chapter
This chapter describes how to access the switch’s CLI, and provides basic
information about configuring the switch, including how to:
■
Physically connect a terminal or PC to the switch (see “ Connecting a
Terminal or PC ” on page 14 and the Quick Install Guide).
■
Set the Terminal Communication parameters to match the router’s settings
(see “
Terminal Communication Parameters ” on page 14).
■
Log in to the switch as a manager (see “ Logging In ” on page 15).
■
Configure IP addresses on the switch interfaces over which you will
manage the switch. This is necessary if you will access the switch using the
GUI or Telnet (see “
Assigning an IP Address ” on page 15).
■
Set routes (see “ Setting Routes ” on page 16)
■
Change the management password to limit unauthorised access to the
switch configuration (see “
Changing a Password ” on page 17).
■
Use the command line interface to control the switch software, including
creating aliases for often used character sequences (see “
Using the
Commands ” on page 18).
■
Set the online help file to gain access to command syntax help (see “ Getting
Command Line Help ” on page 19).
■
Enable any special feature licences (see “ Enabling Special Feature Licences ”
on page 20).
■
Set the name, location and contact details for the switch (see “ Setting
System Parameters ” on page 20).