Allied Telesis Rapier i AT-RP16Fi/SC, Руководство пользователя

Страница: 61 / 123

Operating the switch 61
Software Release 2.6.1
C613-02025-00 REV C
The switch reboots, loading the new patch file and the specified
configuration. Check that the switch operates correctly with the new patch
file.
3. Make the patch part of the default (permanent) release.
If the switch operates correctly with the new patch, make the release
permanent.
SET INSTALL=PREFERRED RELEASE= 86s-261.rez
PATCH= 86261-01.paz
Every time the switch reboots from now on, it loads the new release and
patch from FLASH.
Do not set an untested patch as part of the preferred install.
Using the Built-in Editor
The Rapier Series Switch has a built-in full-screen text editor for editing script
files stored on the switch file subsystem. Using the text editor you can run
script files manually, or set script files to run automatically at switch restart, or
on trigger events. Figure 11 on page 61 shows a example screen shot of the text
editor. To start the editor with a new file or an existing file, enter the command:
EDIT [ filename ]
Figure 11: The editor screen layout.
The editor uses VT100 command sequences and should only be used with a
VT100-compatible terminal, terminal emulation program or Telnet client.
To display editor Help at any time while in the editor press [Ctrl/K,H]; that is,
hold down the Ctrl key and press in turn the K key then the H key.
For more information about the inbuilt editor, see the Operation chapter in the
Rapier Series Switch Software Reference.