Allied Telesis Rapier i AT-RP16Fi/SC, Руководство пользователя

Страница: 29 / 123

Getting Started with the Graphical User Interface (GUI) 29
Software Release 2.6.1
C613-02025-00 REV C
4. Browse to the switch
For normal access, point your web browser to
http:// ip-address
where ip-address is the interface’s IP address.
To access the switch securely if SSL (Secure Sockets Layer) has been
configured on the interface, point your web browser to
https:// ip-address
For more information about secure access, see “Secure Access” on page 29.
5. At the login prompt, enter the user name and password
The default username is manager:
User Name: manager
Password: friend
The System Status or System Hardware Details page is displayed (Figure 6
on page 31). Select options from the sidebar menu to configure and
manage the switch.
Secure Access
You can optionally browse to the switch using Secure Sockets Layer (SSL). This
means that sensitive data including passwords and email addresses can not be
accessed by malicious parties. This section details the required configuration.
For information about SSL, refer to the
Secure Sockets Layer (SSL) chapter of
your Software Reference .
For this configuration to succeed your switch must have PKI, ISAKMP, SSH and SSL
feature licences. If these licences are not already present on your switch, please contact
your authorised distributor or reseller.
To secure your switch’s HTTP Server with SSL for secure switch
management via the GUI.
1. Create a Security Officer user account
Only a user with Security Officer privilege can enable system security and SSL.
To add a user with the login name “CIPHER”, password “sbr4y3”,
login=yes, and SECURITY OFFICER privilege, use the command:
ADD USER="CIPHER" PASSWORD="sbr4y3"
PRIVILEGE=SECURITYOFFICER Login=yes
CREATE CONFIG=ssl.cfg
RESTART SWITCH
2. Login as a Security Officer
To login as the user with Security Officer privilege called “CIPHER”, use
the command:
LOGIN CIPHER
And then enter the password for “CIPHER”, “sbr4y3”.