Allied Telesis CentreCOM 3600 Series Скачать руководство пользователя | Manualshive

Страница: 74 / 85

background image

CentreCOM 3600 Series Hub/Repeaters

69

DEPARTMENT CONCENTRATOR

—Hub that provides a large number of

workstation connections. The term department concentrator refers to multiple
repeaters housed in an AT-36C8 chassis. See Hub/Repeater, Repeater.

DIX CONNECTOR

—See D-Sub Connector

FOIRL

— A fiber optic standard that allows up to 1,000 meters (3,280 ft.) of

multimode duplex fiber optic cable in a point-to-point link.

HARMONICA ADAPTER

—This adapter provides a simple way to convert the

50-pin Telco connection to RJ45 connections.

HEARTBEAT

—See SQE

HOT SWAPPING

— The process of replacing a hub module without bringing

down the network. This process occurs by sliding an active module into a fully
powered up concentrator, replacing a failed module.

HOUSE WIRING

—House wiring is the existing wiring inside a building. This

wiring generally originates from one or more wiring closets, such as a telephone
room. Some older buildings may have wiring unsuitable for 10 megabit data rates.
In these circumstances, it is recommended that the wiring be tested with a
10BASE-T signal/wire tester.

HUB/REPEATER

—A hub is a central signal distributor. It is used in a wiring

topology consisting of several point-to-point segments originating from a central
point. The term hub is often used interchangeably with the term repeater.
Multiport 10BASE-T, 10BASE2 and fiber optic (10BASE-FL, FOIRL) repeaters
are considered hubs. See Repeater.

HUB-to-HUB WIRING

—See MAU-to-MAU Wiring

HUB-to-MAU WIRING

—UTP cables for 10BASE-T hub-to-MAU or NIC cards

are wired straight-through. An RJ45 receptacle at the hub would wire pin-to-pin
to the RJ45 receptacle at the MAU.

IMPEDANCE

—An electrical characteristic of a circuit dealing with the

combination of the AC and DC resistance and the appearance of that resistance to
attached circuits.

JABBER LOCK-UP

—The MAU’s ability to automatically inhibit the transmit

data from reaching the medium if the transmit data time exceeds a specified
duration. This duration is in the range of 20 ms to 150 ms. Jabber lock-up protects
the medium from being overrun with data packets from a possibly defective
device.

JAM

—This is a term used to describe the collision reinforcement signal output by

the repeater to all ports. The jam signal consists of 96 bits of alternating 1s and 0s.
The purpose is to extend a collision sufficiently so that all devices cease
transmitting.

JITTER

—The fluctuation of the data packet in respect to a standard clock cycle.

Jitter is undesirable and must be minimized.

LINK SEGMENT

—The link segment of coaxial cable is a segment that has no

MAU devices, but links together two LAN devices such as repeaters.

«
...
72
73
74
75
76
...
»

Содержание CentreCOM 3600 Series






















































































Отзывы:

Нет отзывов

Похожие инструкции для CentreCOM 3600 Series

Бренд: IBM Страницы: 4

Бренд: DBM Страницы: 50

Бренд: Quick Eagle Networks Страницы: 4

ILDA Gem Laser projector tool

Бренд: Stanwax Laser Страницы: 3

Бренд: Dahua Страницы: 6

Бренд: Konig Страницы: 73

Бренд: Delta Electronics Страницы: 1

Бренд: TRENDnet Страницы: 2

IE-SW-VL16-14TX-2SC

Бренд: Weidmuller Страницы: 17

Бренд: Sangoma Страницы: 6

Бренд: PMD Страницы: 74

5200 Live Series EventCD

Бренд: MF DIGITAL Страницы: 21

Бренд: Global Sun Страницы: 39

Бренд: National Instruments Страницы: 121

Бренд: Intel Страницы: 20

Бренд: Amphenol Страницы: 43

Бренд: Beckhoff Страницы: 84

Бренд: Tenda Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды