CentreCOM 3600 Series Hub/Repeaters
47
Finally, you enter the “erase to end-of-line” sequence:
Data Rate
Selecting the
Data rate
option causes the following new menu to appear:
If you select
Automatic baud rate detection
, you will have to press
RETURN
twice to begin future management agent sessions. The two
RETURNs
are required in order to determine the terminal’s actual data rate.
Enter the control sequence to ERASE TO END-OF-LINE
This sequence must erase from the cursor position to the
end of the line.
Begin by typing any character as a delimiter; then enter
the control sequence itself (if the terminal has a
function key to send the sequence then just hit that
function key); finally, type the delimiter character
again to end your input. For example, if you use ‘/’ as a
delimiter, then type:
/ <control sequence or function key> /
If the terminal does not have this capability, then just
hit Return.
Enter the control sequence to ERASE TO END-OF-LINE
->
Sunnyvale
Please select an option:
19200 bps
9600 bps
4800 bps
2400 bps
1200 bps
600 bps
300 bps
150 bps
75 bps
> Automatic baud rate detection
->
