AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter User Manual
21
Connect to an Un-secured Network
Please perform the following procedure to connect to an un-secured network.
1.
Go to “Network”, select the AP you want to connect to, and then click on “Add to Profile”.
Figure 18: Select a Network
Note:
icon in the AP List means it is a secured network.
2.
In “System
Config” tab, input a Profile Name to identify.
Figure 19: Configure Profile
3.
In “Auth.\Encry.” Tab, confirm that the Authentication is “Open” and the Encryption is “None”.
Figure 20: Configure Auth./Encry.
