AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter User Manual
31
Chapter 5: Utility Introduction
Profile
This page shows saved profile information and operation.
Figure 49: Profile
Profile List
Add: Add a new profile. Press “Add” and configure “System
config” and “Auth.\Enery” tabs to finish the setting.
Edit: Edit a profile. Select the profile you want to edit and press
“Edit”.
Delete: Delete a profile. Select the profile you want to delete and
press “Delete”.
Active: Active a selected profile.
Profile Name
Name of the AP in profile list
SSID
SSID of the AP in profile list
Network Type
Network type of the AP in profile list
Authentication
Authentication of the AP in profile list
Encryption
Encryption of the AP in profile list
Use 802.1x
Whether the AP supports 802.1x
Tx Power
Tx power of the AP in profile list
Channel
Channel of the AP in profile list
Power Save Mode
Power saving setting of the AP in profile list
RTS Threshold
RTS Threshold setting of the AP in profile list
Fragment Threshold
The fragment threshold of the AP in profile list
Status
The SSID and Mac address of the connecting AP
Extra Info
The connection status and the strength of the connecting AP
Channel
The channel of the connecting AP
Authentication
The authentication of the connecting AP
Encryption
The encryption setting of the connecting AP
Network Type
The network type of the connecting AP
IP Address
Obtained IP of this computer
Submask
Current submask
Default Gateway
Current default gateway
More/Less
Switch to show more or less information
