Chapter 5
42
5.4.1.2
device delete
Syntax:
device delete <device>
Description:
Deletes a device from the bridge configuration. The changes
will only take place after the configuration is saved and the
system is rebooted. The syntax of the device name is the same as
that for the device add command.
Example:
device delete rfc1483
5.4.1.3
device list
Syntax:
device list
Description:
Lists all the devices that are currently attached to the bridge. It
does not show the stored configuration (which can be seen with
the config print command).
Example:
device list
5.4.1.4
filter
Syntax:
filter
Description:
Shows the current contents of the bridge’s filter table. The MAC
entries for each device are shown together with the time that the
MAC address was last seen by the bridge. The command also
shows the current filter ageing time (seconds), and the number
of creation failures since the system was started. Creation
failures occur when there is no room left in the filter table for a
new entry.
Example:
filter
