Appendix A
104
T
ESTING
PC
TO
ADSL D
EVICE
’
S
E
THERNET
C
ONNECTIVITY
U
TILITY
E
XPLANATION
PING SYNC
For GUI management, the PC must be able to communicate with the
ADSL device over the Ethernet.
NOTE:
a. The ADSL device’s default LAN IP address is 10.0.0.1, but may
have been changed by the Administrator.
On the PC, select Start and then the Run option. Type the following
in the Open dialog box and select OK. It will show the following
text:
ping 10.0.0.1
Pinging 10.0.0.1 with 32 bytes of data;
Reply from 10.0.0.1: bytes=32 time=10 secs, TTL=32”
Any other message means that the PC cannot reach the ADSL device
over the Ethernet. To test the Ethernet connection, check the cable
connections to the device.
If the problem persists, then configure the PC IP address from
“Setting up the PC IP Address”.
