Appendix A
103
S
ETTING
U
P
T
HE
PC IP A
DDRESS
H
OW
T
O
E
XPLANATION
IP Address
The ADSL device’s default IP address is 10.0.0.1. The IP address
needs to be of the same subnet as the device.
For Example: The IP address should be 10.0.0.2, if the default IP
address of the ADSL device is 10.0.0.1.
Note: The Subnet Mask should be 255.255.255.0.
To properly communicate, the PC must reach the ADSL device over
the Ethernet port of the AT-AR240E or any of its 4 Ethernet ports of
the AT-AR250E. Check for the connectivity LED (green) of the
Ethernet port.
The following steps are recommended to configure the PC. The
Service Provider may provide part of the following information to be
entered on the PC:
a. Click Start on the Task Bar of the PC, select Settings and select
Control Panel.
b. Double-click the Network icon.
c. In the Configuration window, select the TCP/IP Protocol
associated with the installed Ethernet card.
d. Click on the Properties dialog box and select IP Address tab.
e. Select Specify an IP address and fill in the fields with the IP
Address (example: 10.0.0.2) and Subnet Mask (255.255.255.0).
f. Click the Gateway tab. Enter the Gateway IP address (example:
10.0.0.1) and click Add.
g. Click the DNS Configuration tab and click Enable DNS.
h. Enter Host name and Domain name.
i. Under the DNS Server Search Order, enter the DNS Server IP
address and click Add.
j. Click OK and follow instructions to restart the PC.
