Allied Telesis AT-ANC10S/4, Руководство по установке

Страница: 37 / 130

AT-ANC10S/2 and AT-ANC10S/4 Adapters Installation and User’s Guide
37
4. Remove the network adapter card from the shipping package and
store the packaging material in a safe location.
Caution
Wear a grounding device and observe electrostatic discharge
precautions when installing the network adapter card in a system.
Failure to observe this caution could result in damage to the card.
5. Applying even pressure at both corners of the card, push the adapter
card until it is firmly seated in the appropriate PCIe slot. Refer to
Figure 11. Make sure the card is securely seated.
Figure 11. Inserting the Adapter with a High-profile Bracket
Caution
Do not use excessive force when seating the card, because this may
damage the system or adapter. If the card resists seating, remove it
from the system, realign it, and try again.
6. Secure the network adapter card to the chassis with a Phillips-head
screw (not provided). See Figure 12 on page 38.