52
x900 Series Switch and SwitchBlade
®
x908
C613-03092-00 REV J
AlliedWare
operating system
messages
The following table explains messages that the base and fallback software
display at startup.
ERROR: System image has
no section headers
The system image file is corrupt or invalid because it has no
section header information. Contact your authorised
distributor or reseller.
ERROR: No memory
available for storing
ELF
element
A serious problem exists with memory allocation software or
memory on the switch. Contact your authorised distributor
or reseller.
Message
Description
(cont)
Message
Description
Alliedware <version>, built
<date>
Banner that identifies the product software the switch is
executing—base or fallback.
WARNING: Fallback
software will not allow
normal network operation
When starting from fallback software, a reminder that
fallback is a subset of the product software and does not
have its full functionality.
Initialising file system
access...done
or
Initialising file system
access...failed
Product software has initialised access to the file system.
Failure means a problem with the file system or flash.
Processing will continue but data will be lost. Contact your
authorised distributor or reseller.
Validating package
licence...done
or
Validating package
licence...failed
Whether a valid licence has been found for the base package.
Verify licence, version, and switch model and contact your
authorised distributor or reseller if necessary. Not displayed
for fallback.
Installing product_apps.img
<bytes>...done
or
Installing product_apps.img
< bytes>...failed
Whether the product application image of the given size is
installed in RAM and able to execute. This file is part of the
installed package.
Failure could mean not enough RAM or the package is
corrupt. Contact your authorised distributor or reseller.
IGMP packet trapping has
been activated for IGMP
snooping
IGMP packet trapping is enabled to allow IGMP snooping to
function. A warning is displayed if this function could not be
activated. Not displayed for fallback.
Executing configuration
script <startup.cfg>
Configuration commands in the given script file begin
executing if selected by the user. If the script has an error,
appropriate error messages are displayed.
Switch startup complete
The startup process is complete and the switch is ready. If
devices connected to it are sending traffic, then the switch
begins switching operations.
AlliedWare Operating System Error Messages
ERROR: Phase 1 of Software
Manager startup failed -
rebooting
Software Manager is part of the system software that
controls startup of the product software. It failed to complete
the first phase of its initialisation and cannot boot the
fallback software. Manually restart the switch with fallback
software (for details, see
“Overrides” on page 49
).
If this error occurs while rebooting from fallback, contact
your authorised distributor or reseller.
