Allied Telesis AT-8100L/8POE, Руководство пользователя

Страница: 313 / 330

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
313
The following fields are displayed:

ID — LLDP Coordinate Location ID.

Latitude — Latitude value in decimal degrees.

Latitude Resolution — Latitude resolution as the number of valid
bits.

Longitude — Longitude value in decimal degrees.

Longitude Resolution — Longitude resolution as the number of
valid bits.

Altitude — Altitude in meters or floors.

Altitude Resolution — Altitude resolution as the number of valid
bits.

Datum — Geodetic system (or datum) of the coordinates. The
datum codes are:
WGS84 : World Geodetic System 1984
NAD83-MLLW : Mean lower low water datum 1983
NAD83-NAVD : North American vertical datum 1983
Displaying ELIN
Locations
To display an LLDP ELIN location, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.
2. From the Discovery & Monitoring tab, hover over LLDP .
The LLDP tab appears on the right.
3. From the LLDP tab, hover over Locations .
The Locations tab is displayed. See Figure 129 on page 295.
4. From the Locations tab, move the cursor to the right and select ELIN .
The LLDP ELIN Location page is displayed. See Figure 135 on page
301.
The following fields are displayed:

ID — ID number for an LLDP-MED coordinate location entry on the
switch.

Elin LOCATION — ELIN of 10 to 25 digits.