18
Patch Release Note
Patch 86251-05 for Software Release 2.5.1
C613-10356-00 REV F
Debugging for DHCP and Q931 was not being disabled when a Telnet
session finished. This issue has been resolved.
A log message is now created when a user is forced to logout from an
asynchronous port when another user (i.e. someone connected via Telnet)
resets the asynchronous connection with the RESET ASYN command.
After VRRP was enabled, the link status of the switch ports was shown as
UP, even if there was no connection to the ports. This issue has been
resolved.
The SET IP MVR command now has extra error checking. This is to ensure
that if the IMTLEAVE parameter is not specified, the original range of ports
set by the CREATE IP MVR command are still contained within the newly
specified port range.
“AT-A42” was being incorrectly displayed as “AT-A42X-00” in the output
of the SHOW SYSTEM command. This issue has been resolved.
STP ignored some BPDU packets coming in on tagged ports. This issue has
been resolved. Now the VLAN tag is ignored on all devices except Rapier
i
Series Switches with multiple STPs on the receiving port.
The RESET IP COUNTER=ALL command was not working correctly when
issued from the command line. This issue has been resolved.
Sometimes the
Agent Address
field in SNMP traps was not the same as the
IP source address. This meant that sometimes the NMS did not send an
alarm to the network manager when traps were received from switches.
This issue has been resolved.
The Uplink card sometimes unnecessarily changed its status from UP to
DOWN. This issue has been resolved.
When there were a large number of BGP routes, the SHOW BGP ROUTE
command sometimes caused an error. This issue has been resolved.
A fatal error occurred if an IP ARP route entry was deleted after an IP route
filter was added while the IP route was equal to zero. This issue has been
resolved.
PCR: 03321
Module: DHCP, Q931, TELNET
Level: 4
PCR: 03332
Module: TTY
Level: 2
PCR: 03333
Module: IPG
Level: 3
PCR: 03334
Module: MVR
Level: 3
PCR: 03336
Module: CORE
Level: 4
PCR: 03341
Module: STP
Level: 3
PCR: 03345
Module: IPG
Level: 4
PCR: 03346
Module: SNMP
Level: 4
PCR: 03348
Module: SWI
Level: 3
PCR: 03349
Module: BGP
Level: 3
PCR: 03350
Module: IP, SWI
Level: 3
