Allied Telesis 2914 Series, Инструкция по установке и эксплуатации, Страница: 61 / 114

Chapter 4: Configuring the VLAN and Priority
61
Enabling the
VLAN Tagging
When the VLAN tagging is enabled on the adapter, VLAN and Priority tags
are added to Ethernet frames.
Note
Make sure that the Priority & VLAN setting in the Advanced
Properties is disabled. To see and disable the setting, see “Priority &
VLAN” on page 86.
To enable the VLAN tagging, perform the following procedure:
1. Enter 1 at the Console prompt:
>> 1
A “VLAN Enabled” prompt is displayed.
2. Press Enter to continue.
The “please apply settings” prompt is displayed to indicate changes
have been made but not yet applied.
3. Enter 7 at the Console prompt to apply the change:
>> 7
VLAN Configuration Applied prompt is displayed.
4. Press Enter to continue.
Disabling the
VLAN Tagging
When the VLAN tagging is disabled on the adapter, no VLAN and Priority
tags are added.
To disable the VLAN tagging, perform the following procedure:
1. Enter 2 at the Console prompt:
>> 2
A “VLAN Disabled” prompt is displayed.
2. Press Enter to continue.
The “please apply settings” prompt is displayed to indicate changes
have been made but not yet applied.
3. Enter 7 at the Console prompt to apply the change:
>> 7
A “NIC must be REMOVED to disable VLAN” prompt is displayed.
4. Press Enter to continue.