Allied Telesis 2914 Series, Инструкция по установке и эксплуатации, Страница: 60 / 114

2914 Series Fiber Network Adapters with WoL Installation and User’s Guide
60
Configuring the VLAN and Priority Settings on the Network Adapter
You can specify or modify the VLAN and Priority settings on the
AT-2914GP/SP adapter through the CLI. See Table 4.
Table 4. VLAN and Priority Settings
Item Description
Device name Displays the network adapter name.
FW Displays the current console firmware revision.
VLAN and Priority Settings:
VLAN Tagging
Displays the current tagging status. The options
are enabled or disabled. The default is disabled.
PoE VID Displays the VLAN ID for the PoE copper port. The
default is 0. The range is 0 to 4095.
PoE QoS Displays QoS priority level for the PoE copper port.
The default is 0. The range is 0 to 7.
PC VID Displays the VLAN ID for the PC traffic. The default
is 0.
PC QoS Displays the QoS priority level for the PC traffic.
The default is 0.
VLAN and Priority Setting Commands:
1
Enable VLAN tagging.
2 Disable VLAN tagging.
3 Change the VLAN ID for the PoE copper port.
4 Change the QoS priority level for the PoE copper
port.
5 Change the VLAN ID for the PC traffic.
6 Change the QoS priority level for the PC traffic.
7 Saves and Applies the VLAN settings.