ALLIANCE UW50P4, Установка и обслуживание

Страница: 5 / 22

3
F232160 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Introduction
Nameplate Location
The nameplate is located at the top of the machine.
Always provide the machine’s serial number and
model number when ordering parts or when seeking
technical assistance.
Replacement Parts
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems at (920) 748-3950
for the name and address of the nearest authorized
parts distributor.
Customer Service
For technical assistance, call any of the following
numbers:
(850) 718-1025
(850) 718-1026
Marianna, Florida U.S.A.
(920) 748-3121
Ripon, Wisconsin U.S.A.
Uncrating
All UW 50 pound washer-extractors are carefully
tested, inspected and adjusted in our plant before
crating and are shipped fully assembled. Upon
uncrating, inspect carefully to determine whether there
has been any damage incurred in shipping. If so,
IMMEDIATELY notify the carrier. Do not remove the
wood base until the machine has been put adjacent to
the place that it will occupy. DO NOT attempt to move
the machine by pushing on sides. Always use a pry bar
or other device at the bottom of the machine.
PHM516N
1 Nameplate
PHM516N
1