Alliance Laundry Systems PD3JGBGS403UG01, Программирование

Страница: 37 / 40

XXXF
or
XXXC
Thermistor Temperature Test The temperature will be displayed in ei-
ther Fahrenheit or Celsius, depending on
machine’s configuration. If control
senses a shorted thermistor, SH will be
displayed. If control senses an open ther-
mistor, oP will be displayed.
10 PUSH
,
Strt
,
10
10 Minute Test Cycle Determines if dryer can function in a cy-
cle for 10 minutes. LED display will
flash one second on and one second off.
If the door is opened while the START
LED is flashing, the control will display
“door” until the door is closed. While this
10 Minute Test Cycle is running, the
START pad may be used to decrement
the remaining cycle time. If power to the
control is turned off before this test cycle
has ended, the cycle is cleared. When the
control is powered back up, it will be re-
set to Ready Mode.
Pd
Power Down This is the final step of the Factory Test
Cycle and when displayed it signifies the
test has been completed.
Table 4
NOTE: If power to the control is turned off before 10 Mi-
nute Test Cycle has ended, the cycle will be cleared
from control.
Testing Machine and Electronic Control Functions
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
37 Part No. D515810ENR3