Alliance Laundry Systems D677I_SVG, Руководство по установке и эксплуатации

Страница: 49 / 55

2. Follow directions on display. Do not remove the card until the
REMOVE CARD LED is lit.
M343I_SVG
Figure 70
NOTE: If Additional Time Feature is turned on, addi-
tional dryer time may be purchased at cycle start or
while dryer is running.
3. Remove knits when slightly damp because overdrying may
cause shrinkage. Do not tumble dry knit woolens.
Start Dryer
1. To start dryer, push START pad.
2. To stop dryer at any time, open the door.
3. To restart the dryer, close door and push START pad. Cycle
is completed when time remaining reaches 00 minutes.
D778I_SVG
Figure 71
Indicator Lights
INSERT COINS/CARD INSERT COINS/CARD is lit
to prompt the user to insert
coins or a card to satisfy the
vend price. When INSERT
COINS/CARD is lit,the three
digits will display the vend
price remaining to be satisfied.
START START is lit whenever the
dryer is not in a cycle, the full
vend price has been satisfied
and the dryer door is closed.
When the START pad is
pressed, the cycle will begin or
resume.
DRYING DRYING is lit to indicate that
one of the heated cycles
(HIGH TEMP, MED TEMP,
LOW TEMP or DELICATES)
is currently in operation.
DRYING will turn off at the
end of a heated cycle or when
the COOL DOWN cycle be-
gins.
COOL DOWN COOL DOWN is lit whenever
the COOL DOWN portion of a
heated cycle is active. It is also
lit when the NO HEAT cycle
is in operation.
ADD TIME (Card Models On-
ly) ADD TIME flashes when a
card is inserted while a cycle is
running or when a card is left
in the reader for at least five
seconds after cycle has started.
REMOVE CARD (Card Mod-
els Only) REMOVE CARD flashes
when a card is inserted or left
in the reader after a transaction
is complete. It will also flash
alternately with ADD TIME
when a card is inserted while a
cycle is running or when a
card is left in the reader.
Operation
Part No. 512680R10
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 49