Alliance Laundry Systems D677I_SVG, Руководство по установке и эксплуатации

Страница: 45 / 55

To Insert Card
1. Insert card into opening.
2. Follow directions on display. DO NOT REMOVE THE
CARD UNTIL DISPLAY READS "Remove Card."
M330I_SVG
Figure 56
NOTE: If Additional Time Feature is turned on, addi-
tional dryer time may be purchased at cycle start or
while dryer is running.
3. Remove knits when slightly damp because overdrying may
cause shrinkage. Do not tumble dry knit woolens.
Start Dryer
1. To start dryer, push START pad.
2. To stop dryer at any time, open the door.
3. To restart the dryer, close door and push START pad. Cycle
is completed when time remaining reaches 00 minutes.
D296I_SVG
Figure 57
Indicator Lights
INSERT COINS INSERT COINS is lit to
prompt the user to insert coins
or card to satisfy the vend
price for the chosen cycle.
When INSERT COINS is lit,
the three digits and decimal
point will display the vend
price remaining to be satisfied.
PUSH START PUSH START is lit whenever
the dryer is not in a cycle, the
full vend price has been satis-
fied and the dryer door is
closed. When the START pad
is pressed, the cycle will begin
or resume. The PUSH START
status word flashes at one-sec-
ond intervals when activated.
DRYING DRYING is lit to indicate that
one of the heated cycles
(HIGH TEMP, MED TEMP,
LOW TEMP) is currently in
operation. The status word
DRYING goes off at the end
of a heated cycle or when the
COOL DOWN cycle begins.
COOL DOWN COOL DOWN is lit whenever
the COOL DOWN portion of a
heated cycle is active. It is also
lit when the NO HEAT cycle
is in operation.
PRICE PRICE is lit to indicate that the
value dispalyed is the vend
pricing remaining to be satis-
fied. Once the vend price is
satisfied, the word PRICE will
go off.
TIME REMAINING TIME REMAINING is lit to
indicate that the time dispalyed
by two digits and the colon is
the time remaining (in mi-
nutes) in the active cycle. The
colon flashes at one-second in-
tervals and time continually
counts down in an active cy-
cle.
Should dryer stop before cy-
cle is completed, the motor
overload protector may have
cycled. Refer to Maintenance
section.
Operation Instructions for MDC Dryers
WARNING
To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUC-
TIONS before operating this appliance.
W727
Operation
Part No. 512680R10
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 45