Alliance Laundry Systems D677I_SVG, Руководство по установке и эксплуатации

Страница: 38 / 55

TLW2088N_SVG
4
3
2
1
1. Greenwald Coin Slide
2. Monarch or ESD Coin Slide
3. Two Stars
4. One Star
Figure 35
3. If installing a Monarch or ESD coin slide, position lever with
arm that has two stars facing down. Refer to
Figure 35 .
4. Install extension lever with rounded corner facing away from
extension bracket using bolt, one or two flat washers (shims)
(use number of washers included in kit) and nut. Refer to
Fig-
ure 36 . Make sure washers are flat against bracket.
TLW2089N_SVG
9
8
7
6
5
4
3 2
1
1. Spring
2. Bolt
3. One or Two Flat Washers (Shims)
4. Rounded Corner
5. Nut
6. Extension Lever
7. Star(s) Facing Down
8. Extension Bracket
9. Loops
Figure 36
5. Torque nut between 18 and 20 inch-pounds [2 and 2.26 Nm],
or tighten nut firmly.
6. Install extension spring in bracket hole and hole in upper arm
of lever. Refer to
Figure 36 .
7. Bend loops closed after installation.
8. Check to make sure the lever swings freely.
Installing Extension Onto Coin Slide: Option One
1. Install slide extension onto top of coin slide using two re-
maining screws and lockwashers. Refer to
Figure 37 .
Installation
38
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Part No. 512680R10