Error Code Programming
Err
Drain Error - If Enabled, will set error after 15 minutes if
empty water level isn't reached. If disabled will allow draining
forever if empty level never reached.
Water Leak Detection Error - This error checks for whether
the machine is leaking water by adding 1 minute to the cycle
to check for water leaks.
Slow Drain Detection Error - Is used to detect for slow drain-
ing conditions. Helps allow for locations with poor draining
conditions.
Non-Fatal Unbalance Error - Error shown at end of cycle if
load has been detected to be out of balance during the cycle.
Shown after the door is opened or a key is pressed. This error
will remain displayed until another key has been pressed or
one minute passes.
Suds Lock Error Display - Shown at end of cycle after the
door is opened or a keys is pressed if suds were still detected
in the machine after all Suds Removal Routines allowed have
been run in the cycle. Will be cleared after one minute or if a
key is pressed.
Table 2
Water Level
FLvL
This option allows the owner to set the low, medium and high
water levels which can be used in fill steps to set water levels in
cycle programming.
1. Control must be in Manual Mode. Refer to
2. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad until
Prog
appears in the display. Press the
START (enter) keypad, and
AtS
will appear in the display.
3. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to scroll through the programmable options until
FLvL
appears in the display.
4. When
FLvL
appears in the display, press the START (enter)
keypad to enter the display the current value.
5. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to change the water level between 1 and 30.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Number of Balance Attempts with No
Loss of Time
bALA
This option allows the owner to program the machine's number of
balance attempts with no loss of time. If the machine needs to re-
balance for any reason, time will pause for additional balance at-
tempts when this parameter is greater than 1. A value of 1 allows
for the normal allocated time. Further attempts beyond the pro-
grammed value will not pause cycle time. This may result in low-
er max spin speeds and time.
1. Control must be in Manual Mode. Refer to
2. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad until
Prog
appears in the display. Press the
START (enter) keypad, and
AtS
will appear in the display.
3. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to scroll through the programmable options until
bALA
appears in the display.
4. When
bALA
appears in the display, press the START (enter)
keypad. The current Number of Balance Attempts with no
Loss of Time will appear in the display.
5. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to change the current value. The factory default
setting is 3.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
OPL Parameters
oPL
This option allows the owner to enable or disable the OPL Pa-
rameters in which no vend price needs to be satisfied to operate
the machine.
1. Control must be in Manual Mode. Refer to
2. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad until
Prog
appears in the display. Press the
START (enter) keypad, and
AtS
will appear in the display.
3. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to scroll through the programmable options until
oPL
appears in the display.
4. When
oPL
appears in the display, press the START (enter)
keypad to enter the OPL submenu.
5. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to scroll through the OPL submenu options.
6. Press the START (enter) keypad when the desired option ap-
pears in the display
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
25
Part No. 805407R6
Содержание BFNBCASG113TN01
Страница 2: ......
