Card Reader Display Control
CArd
This option allows the owner to program whether the display is
controlled by the machine’s electronic control or an external pay-
ment system such as a card reader.
NOTE: This feature does not need to be programmed
manually. The card reader itself makes this determina-
tion.
1. Control must be in Manual Mode. Refer to
2. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad until
Prog
appears in the display. Press the
START (enter) keypad, and
AtS
will appear in the display.
3. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to scroll through the programmable options until
CArd
appears in the display.
4. When
CArd
appears in the display, press the START (enter)
keypad. The current Card Reader Display Control Status will
appear in the display.
on
= Card Reader/External Payment System controls display
oFF
= Machine Electronic Control controls display (factory de-
fault setting)
5. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to change the current status.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Audio Signal
AUd
This option allows the owner to program an audio signal on or
off.
There are four occasions when a signal may sound during the
washer operation. These four occasions are listed below:
1.
Keypad Depression Signal
By default, this signal is turned
on and will sound for a quarter of a second. This signal will
sound each time a keypad is pressed.
2.
Coin Input/Card Insertion Signal
By default, this signal is
turned on and will sound for a quarter of a second each time a
coin or card is entered.
3.
Remove Card Signal (Card Models Only)
By default, this
signal is turned on and will sound one second on and one sec-
ond off when the control is prompting for card removal.
4.
Signal for Start
By default, this signal is turned on and will
sound one second on and one second off for 10 seconds after
vend price has been satisfied.
How to Program the Audio Signal
1. Control must be in Manual Mode. Refer to
2. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad until
Prog
appears in the display. Press the
START (enter) keypad, and
AtS
will appear in the display.
3. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to scroll through the programmable options until
AUd
appears in the display.
4. When
AUd
appears in the display press the START (enter)
keypad.
on
or
oFF
will appear in the display.
5. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to change the current value.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The next option will appear in the dis-
play.
Error Code Programming
Err
This option allows the owner to turn on or turn off the control's
error codes.
1. Control must be in Manual Mode. Refer to
2. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad until
Prog
appears in the display. Press the
START (enter) keypad, and
AtS
will appear in the display.
3. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to scroll through the programmable options until
Err
appears in the display.
4. When
Err
appears in the display, press the START (enter)
keypad. The current status will appear in the display.
5. Press the NORMAL WARM (
∧
) or the DELICATES COLD
(
∨
) keypad to turn the error codes
on
or
oFF
.
6. Press the START (enter) keypad when the desired option ap-
pears in the display. Refer to
for a list of the error co-
des that will be turned off or on.
Error Code Programming
Err
Coin Error Penalty - If enabled, coin error will erase previous
coins entered and reset the vend price.
Vend Header Present Error - If enabled and coin drop header
is unplugged, control ignores coin inputs.
Fill Error - If enabled, will set error after 30 minutes if fill lev-
el isn't reached. If disabled will allow filling forever if fill lev-
el never reached.
No Water Flow Error - If enabled, will set error after 5 mi-
nutes if 4 inch water level isn't reached. If disabled will allow
filling forever until 4 inch level is reached.
Table 2
continues...
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
24
Part No. 805407R6
Содержание BFNBCASG113TN01
Страница 2: ......
