8
Assembly and Installation Instructions
Tools (Safety Enclosure)
Installation of the safety enclosure
requires a 13mm hex wrench (included) or a deep socket with a ratchet or cordless
drill, and a 5mm Allen wrench (included)
. An 8 foot A-Frame ladder will be useful for some steps (use care and follow
procedures for use). Safety glasses and gloves are also recommended for safety.
Parts List (Safety Enclosure)
Your 10ft VariableBounce Trampoline System is shipped with the parts shown below. The safety enclosure parts ship in
a separate box, which has a smaller box inside of it. If any parts are missing, immediately call AlleyOOP Sports Custom-
er Service at 408-213-2551.
Note:
Do
NOT
discard the foam tubing (Reference #12 and #13); it is needed to make the pole assemblies. It is not
just packing material. Do
NOT
remove any caps from the ends of any of the support poles.
Nylock nut
(Ref. #16d)
Acorn nut
(Ref. #16e)
Reference #
Part #
Description
Quantity
10
POL-A-11216A
Lower support pole, with snap-button
6
11
POL-P-11332A
Upper support pole, notch at one end
6
12
FOA-P-10078A
Long foam tubing (1 tube packed over 1 pole)
6
13
FOA-P-10103A
Short foam tubing (2 tubes packed over 1 pole)
6
14
SLE-P-11398A
Pole sleeve, green vinyl
6
15
CAP-P-10075A
Ball end cap
6
16a
BOL-P-10081A
M8 bolt, Allen head
12
16b
SPA-P-10083A
Pole spacer, black
12
16c
WAS-P-10082A
Washer
24
16d
NUT-P-10084A
M8 Nylock nut
12
16e
NUT-P-10622A
M8 acorn nut, capped end
12
17
TOO-P-10158A
Wrench, 13mm hex
1
18
TOO-P-10159A
Wrench, 5mm Allen
1
19
NET-P-21203-00
Heavy-duty net
1
20
STR-P-11150A
30” strap with buckle
8
Tools (Trampoline)
No tools are required for installation of the trampoline. However, safety glasses and gloves are recommended for safety.
Parts List (Trampoline)
Your 10ft VariableBounce Trampoline System is shipped with the parts shown below. The trampoline parts ship in 2
separate boxes which may arrive on different days. If any parts are missing, immediately call AlleyOOP Sports Custom-
er Service at 408-213-2551.
Reference #
Part #
Description
Quantity
1
LEG-A-11229-01 Horizontal leg piece
3
2
LEG-P-11228-01 Vertical leg piece
6
3
RAI-P-11227A
Rail piece with 2 leg sockets, 12 spring notches
3
4
RAI-P-11226A
Rail piece with no leg sockets, 12 spring notches
3
5
MAT-S-11287A Mat, 72 V-rings
1
6
SPR-P-10059A Spring, 8.5 inches
72
7a
PAD-A-11237A Frame pad section
6
7b
PAD-P-11311A Pad connector, with Velcro (connects frame pad sections)
12