10
Assembly
Note:
We recommend at least 2 people participate in assembling the trampoline. Use pages 8—9 to help with part
names and numbers.
Assembly and Installation Instructions
1)
Lay all rail and leg pieces in a circle as shown. See page 8 for
detailed part descriptions.
2)
Using 1 horizontal leg piece and 2 vertical leg pieces, build a
leg assembly as shown above.
>> Repeat with all remaining leg pieces. When finished, you will
have 3 complete leg assemblies.
4)
Stand 1 leg assembly upright and connect a rail with 2 sockets
as shown.
3)
IMPORTANT:
The holes through the vertical legs
—
located
near the middle of each leg and not related to the snap
buttons
—
will be used for connecting the enclosure poles in a
later step. On one side, the hole will be flat and flush with the
leg. On the other side, the hole will be indented into the leg. You
can see and feel a difference between each side by running your
finger along the hole.
Both vertical leg pieces must have the indented side facing the
same direction, and when you attach the leg assemblies to the
rails in the next steps, the indented side must face out and away
from the trampoline.
>> Repeat Step 2 with all remaining leg pieces. When finished,
you will have 4 complete leg assemblies.
Rail with 2
leg sockets
Ref. #3
Rail with no
leg sockets
Ref. #4
Horizontal
leg piece
Ref. #1
Vertical leg
piece
Ref. #2
(Top view)
Leg assembly
Holes in
vertical leg
pieces
must have
indentations facing the
same direction
IMPORTANT:
See next page for how to properly align
the leg assemblies.