11
Assembly and Installation Instructions
IMPORTANT:
As you connect leg assemblies to rails, pay careful attention to holes in vertical leg pieces. All holes are designed to face center of
trampoline and be aligned with holes in leg sockets of trampoline, when properly installed.
If holes in vertical legs are not facing toward middle of trampoline, you will have to flip the whole leg assembly around 180 degrees.
Be sure vertical leg pieces have indented side facing away from trampoline .
Hole in leg socket
of trampoline rail.
Hole in
vertical leg
piece
, shown with
indentation facing out.
All holes shown
correctly lined up with
each other.
Snap button
If your horizontal legs have snap buttons, continue reading. If not, skip to the next step.
Correct
Incorrect
(rotate horizontal legs
180 degrees)
(Top view showing whole
trampoline frame assembled.)
Leg assembly
Leg assembly
Holes in leg assembly point toward
center of trampoline
