manualshive.com logo in svg

allen SE12, Руководство по эксплуатации и запасным частям, Страница: 22 / 78

Поделиться
Скачать
allen SE12 Скачать руководство пользователя страница 22

SECTION 1

SAFETY

064633

Page 22

NEVER

 operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing 

protection, steel-toed boots and other protective devices required by the job or city and state regulations.

Avoid wearing jewelry or loose fitting clothes that may snag on the controls or moving parts as this can cause serious injury.

NEVER

 operate this equipment when not feeling well due to fatigue, 

 

   illness or when under medication.

NEVER

 operate this equipment under the influence of drugs or alcohol.

ALWAYS

 clear the work area of any debris, tools, etc. that would constitute a hazard while the equipment is in operation.

ALWAYS

 wear adequate hearing protection while running your air powered screed.

DO NOT

 use the equipment for any purpose other than its intended purposes or applications.

This equipment should only be operated by trained and qualified personnel 18 years of age and older.

Whenever necessary, replace serial plate, operation and safety decals when they become difficult to read. Manufacturer 
does not assume responsibility for any accident due to equipment modifications. 
Unauthorized equipment modifications will void all warranties.

NEVER

 use accessories or attachments that are not recommended by AEC for this equipment. 

Damage to the equipment and/or injury to operator may result.

ALWAYS

 know the location of the nearest fire extinguisher.

ALWAYS

 know the location of the nearest first aid kit.

General Safety

Содержание SE12















































































Отзывы:

Нет отзывов