Allen-Bradley PowerFlex 20-COMM-D, Руководство пользователя

Страница: 50 / 149

5-4 Using I/O Messaging
When enabled, the Logic Command/Status word is always word 0 in the
I/O image. The
Logic Command is a 16-bit word of control produced by
the scanner and consumed by the adapter. The Logic Status is a 16-bit
word of status produced by the adapter and consumed by the scanner.
This manual contains the bit definitions for compatible products
available at the time of publication in
Appendix D , Logic Command/
Status Words . For other products, refer to their documentation.
When enabled, Reference/Feedback begins at word 1 (16-bit) or word 2
(32-bit) in the I/O image. The
Reference (16 bits or 32 bits) is produced
by the controller and consumed by the adapter. The Feedback (16 bits or
32 bits) is produced by the adapter and consumed by the controller. The
size of the Reference/Feedback is determined by the drive and displayed
in
Parameter 07 - [Ref/Fdbk Size] in the adapter.
A Datalink is a mechanism used by PowerFlex drives to transfer data to
and from the controller. Datalinks allow a parameter value to be changed
without using an Explicit Message. When enabled, each Datalink
occupies two 16 or 32-bit words in both the input and output image.
Parameter 08 - [Datalink Size] will indicate whether the drive uses 16
or 32-bit words for Datalinks.
Rules for Using Datalinks
•
Each set of Datalink parameters in a PowerFlex drive can be used by
only one adapter. If more than one adapter is connected to a single
drive, multiple adapters must not try to use the same Datalink.
•
Parameter settings in the drive determine the data passed through the
Datalink mechanism. Refer to the documentation for your drive.
•
When you use a Datalink to change a value, the value is not written
to the Non-Volatile Storage (NVS). The value is stored in volatile
memory and lost when the drive loses power.
Using Logic Command/Status
Using Reference/Feedback
Size Valid Values In I/O Image Example
16-bit -32768 to 32767 Word 1 Figure 5.1
32-bit -2147483648 to 2147483647 Word 2 and Word 3 Figure 5.2
Using Datalinks