Allen-Bradley GuardShield Micro 400, Руководство по установке, Страница: 18 / 32

18 Rockwell Automation Publication 445L-IN005A-EN-P - May 2018
GuardShield Micro 400 Safety Light Curtains
Technical Specifications
Attribute Value
Safety Ratings
Standards IEC/EN61496 Parts 1 and 2, UL61496 Parts 1 and 2, UL1998
Safety classification Type 4 per IEC/EN61496. Category 4 device per EN 954-1, SIL 3 per IEC 61508, PLe per EN/ISO 13849-1
Probability of a dangerous failure per hour PFH
6.0 E-9 1/h MSR42 or MSR41 and MSR45E
4.0 E-9 1/h Micro 400
Certifications c-UL-us Listed, TÜV, and CE Marked for all applicable directives
Outputs
Micro 400 outputs Data output to controller (MSR41 or MSR42)
MSR41/MSR42 outputs Two 400 mA OSSD
Non-safety outputs Auxiliary outputs from MSR41 or MSR42 controller—2 configurable 100 mA, outputs
Switching current @ voltage, max 400 mA @ 24V DC
Operating Characteristics
Response time
14 mm (0.55 in.): 12…42 ms, varies by protective height and resolution, protective height 150…1200 mm (5.95…47.24 in.)
30 mm (1.18 in.); 11…23 ms, varies by protective height and resolution, protective height 150…1200 mm (5.95…47.24 in.)
Indicator LEDs ON -State, OFF-State, Intensity, lockout
Protected height
Standard slim profile: 50…1200 mm (1.97…47.2 in.) in 50 mm (1.97 in.) increments
Re-inforced profile: Up to 2200 mm (86.6 in.)
Resolution 14 mm (0.55 in.), 30 mm (1.18 in.), or PAC (Perimeter)
Scanning
Range/resolution
14 mm (0.55 in.) resolution: 0…5 m (16.4 ft)
30 mm (1.18 in.) resolution: 0…5 m (16.4 ft)
Synchronization Electrical through MSR41 or MSR42
Wave length 940 nm
Time for self check when switching on U
sp
< 5 s
Environmental
Enclosure type rating
Micro 400 is IP54;
Micro 400 IP69K is IP65, IP66, IP67, IP68, IP69K, Plug: IP65
Relative humidity 15…95% (noncondensing)
Operating temperature 0…55 °C (14…131 °F)
Storage temperature -20…+70 °C (4…158 °F)
Vibration IEC 60068-2-6; Frequency 10…55 Hz; Amplitude 0.35 mm (0.01 in.)
Shock
IEC 60068-2-29; Acceleration 10 g, pulse duration 16 ms 10…55 Hz;
Amplitude 0.35 mm (0.01 in.)
Power supply Input power from MSR41 or MSR42 controller
Input power, max 24V DC ±15% (MSR41 or MSR42 controller)
Maximum residual ripple 5% of Vss
Power consumption 0.07 A max (no load)
Equipment class III (VDE 0106 part 100)
EMC IEC 61496 part 1
Physical Characteristics
Number of beams, max 255
Standard mounting 180° adjustable mounting brackets supplied (two sets 445L-AF6143)
Weight Varies by protective height
Housing cross section
Slim profile (standard): 15 mm x 20 mm (0.59 x 0.79 in.)
Re-inforced profile (special): 30 mm x 40 mm (1.18 x 1.57 in.)
Optical window Polycarbonate
Enclosure and enclosure treatment Aluminum, polyester powder coated, silicon free
Connection type Transmitter/receiver: 8-pin M12 micro QD
Cable length
1, 2, 3, 5, and 8 m (3.3, 6.6, 9.8, 16.4, and 26.2 ft) cable M12 to RJ45 for MSR41 or MSR42.
Max total system length cannot exceed 10 m (32.8 ft).
Patchcords
1 m, 3 m, and 5 m (3.3 ft, 9.8 ft, and 16.4 ft) M12 to M12 patchcords.
Total system length cannot exceed 10 m (32.8 ft) including protective height of Micro 400, integrated cables and patchcords from M12 connector to MSR41 or
MSR42.