Allen-Bradley CENTERLINE 2100, Руководство по установке, Страница: 79 / 136

Rockwell Automation Publication 2100-IN012G-EN-P - August 2016 79
Chapter
7
Final Checklist Before Energizing
Introduction
This section provides guidance for the startup of a newly installed MCC.
We recommend making an itemized list including the following:
• Serial number
• Number of sections
• Number of units and their corresponding voltage
• Current ratings
• Horsepower ratings
• Types of circuits
• Fuse sizes
• Circuit breaker ratings and trip settings
• Heater elements requirements
• Arc resistant components
• Other important data
The itemized list could be modeled after the MCC layout drawings supplied
with each MCC. Save this itemized list in a file along with other data for the
MCC such as, component manuals, heater element instructions, MCC
manuals, and wiring diagrams. Blank sample forms are provided at the end of
this chapter.
Pre-energizing Check
Procedure Allow only a ‘qualified person’ to conduct the pre-energizing check. A
qualified person is defined by NEMA Standards Publication / No. ICS 2.3,
Instructions for the Handling, Installation, Operation and Maintenance of
Motor Control Centers, Section 1 as follows:
1.4 Qualified Person
For the purpose of this guide, a qualified person is one who is familiar
with the installation, construction and operation of the equipment and
the hazards involved. In addition, he or she has the following
qualifications:
1.4.1 Is trained and authorized to energize, de-energize, clear, ground
and tag circuits and equipment in accordance with established safety
practices.