Allen-Bradley 2715-15CA, Руководство пользователя

Страница: 51 / 106

Rockwell Automation Publication 2715-UM001A-EN-P - July 2015 51
Configure Terminal Settings Chapter 3
Configure the Ethernet Ports You can configure the link speed and duplex mode for each of the Ethernet ports
on the terminal. The ports are identified as Ethernet Link 1 and Ethernet Link 2.
To view or change the link settings of the Ethernet ports, follow these steps.
1.
Press the navigation button on the terminal.
2.
Tap Settings, or tab to the menu item and press Enter.
3.
Tap Network.
4.
Tap the Ethernet icon.
5.
Select the Ethernet options for your network configuration:
•
Tap the Enable Ethernet Link 1 or Enable Ethernet Link 2 checkbox to
add or remove the check mark. The option is enabled when the box is
checked.
•
To set the speed and duplex options that are based on the network
connection, tap the Auto negotiate checkbox. The option is enabled
when the box is checked.
•
To set the speed and duplex options, tap the Auto negotiate checkbox
to remove the check mark from the box. Then tap the speed and duplex
options for your network.
6.
To close the window, tap X.
TIP
E
You cannot configure the Ethernet ports within the View Designer software.
IMPORTANT
For DLR configurations, Ethernet Link 1 and Ethernet Link 2 must be
enabled.
1
1
Ethernet Link 1
Ethernet Link 2