DS-K5672 Series Face Recognition Terminal
Quick Start Guide
©
2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instruc ons for using and managing the Product. Pictures, charts, images
and all other informa on hereina er are for descrip on and explana on only. The informa on
contained in the Manual is subject to change, without no ce, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(h ps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in suppor ng
the Product.
Trademarks
and other Hikvision's trademarks and logos are the proper es of Hikvision in various
jurisdic ons.
Other trademarks and logos men oned are the proper es of their respec ve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Data Protec on
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example,
for device with facial recogni on features, biometrics data is stored in your device with
encryp on method; for fingerprint device, only fingerprint template will be saved, which is
impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance
with the applicable data protec on laws and regula ons, including without limita on,
conduc ng security controls to safeguard personal data, such as, implemen ng reasonable
administra ve and physical security controls, conduct periodic reviews and assessments of the
effec veness of your security controls.
Scan the QR code to get the user manual for detailed informa on.
UD17938B-B
3.1 Wiring (Normal)
1 Installation
Use only power supplies listed in the user instruc ons:
Model
Manufacturer
Standard
ADS-26FSG-12 12024EPG
MSA-C2000IC12.0-24P-DE
ADS-26FSG-12 12024EPB
MOSO Technology Co., Ltd
Shenzhen Honor Electronic Co., Ltd
PB
PDE
103.36 mm
100 mm
286.3 mm
2 Appearance
microUSB Interface
(Use microUSB to USB cable
to connect with USB interface)
Camera Camera
IR Light
IR Light
Screen
Card Presen ng
Area
The figures are for reference only.
3
4
67 mm
67 mm
80 mm
1
2
Backlight
Direct
Sunlight
Direct Sunlight
through Window
Indirect Sunlight
through Window
Close to Light
Installa on Environment:
Indoor and outdoor installa on are supported. if installing the device
indoors, the device should be at least 2 meters away from the light,
and at least 3 meters away from the window or the door. If installing
the device outdoors, you should apply Silicone sealant among the
cable wiring area to keep the raindrop from entering.
Width of Reinforcing Board > 125 mm
Use 4 screws (M3 or
M4),Secured by flange
nuts
Press 8 rivet water-
proof nut
Model: BS-M6-1
15 mm(Suggested)
4- 12 mm Soldering
Hole Solder the four
holes, polish the outer
surface, and implement
with wire drawing.
Reinforcing Board
Inner Surface
of Turnsilte
The dis
tance betw
een the turns
le
and the boar
d edg
e should be no
long
er than 10 mm
25 mm(Sug
ges
ted)
Before you start:
1. Use 4 screws (M3 or M4),
secured by flange nuts, to
install the reinforcing board
on the inner surface of the
turns le.
The distance between the
turns le and the edge should be
no longer than 10 mm.
2. Drill holes on the
turns le’s inner surface
according to the figure
displayed below. And install
water-proof nut.
Solder a er pressing rivets
to avoid water from entering.
Rotate to open the lower cover.
Route the cables through the cable hole on the turns le.
Align the holes on the base with those on the turns le and place the
device with bracket on the turns le.
Use 4 screws to secure the bracket and the turns le.
1
2
Lower Cover
Screw
Base
Cover the lower cover on the base and rotate to secure.
3
4
Loosen the screws inside and adjust the device eleva on.
A er adjustment, secure the screws and install the upper cover.
Turns le
The default eleva on angle is 15
°.
The adjustable eleva on angle is from 0
to 15
°.
Upper Cover
Adjustable
Eleva on
Screws
Shenzhen Honor Electronic Co., Ltd
Shenzhen Honor Electronic Co., Ltd
Shenzhen Honor Electronic Co., Ltd
Shenzhen Honor Electronic Co., Ltd
PG
PCU
PI
PBR
ADS-26FSG-12 12024EPCU/EPC
ADS-26FSG-12 12024EP-01
ADS-26FSG-12 12024EPBR
GND
Black
Green
White
Yellow
Blue
Black
White/Purple
White/Yellow
Yellow/Green
White/Red
Black
Yellow/Grey
GND
GND
Yellow/Black
GND
BTN
12V Power Supply
Wiegand
Card Reader
Group B
Group D
IN2
GND
IN1
Red
Black
NO
COM
NC
COM
NC
NO
COM
Electric Dropbolt
Power Supply
Electric Strike
Exit Button
Power Input
Alarm Input
Alarm Output
RS-485
Wiegand
Door Lock
Network Interface
When connec ng door contact and exit bu on,
the device and the RS-485 card reader should
use the same common ground connec on.
The Wiegand terminal here is a Wiegand input
terminal. You should set the device’s Wiegand
direc on to “input”. If you should connect to
an access controller, you should set the
Wiegand direc on to “Output”. For details, see
the user manual.
The suggested external power supply for door
lock is 12 V, 1 A
.
The
suggested
external power supply for
Wiegand card reader is 12 V, 1 A
.
For
wiring
the
fire
system
,
see the user manul.
Do not wire the device to the electric supply
directly.
B1
B2
B3
B4
B5
B6
C1
C2
C3
C4
C5
C6
D1
D2
D3
D4
D5
D6
D7
(NC)
(COM)
(NO)
NC
NO
Yellow/Orange
Black
Yellow/Blue
Yellow/Red
Yellow/Brown
Yellow/Purple
Door Contact
