ALLEN
&
HEATH
5 AP10733_1_XONE:PX5 User Guide
CONTENTS
To ensure you get the maximum benefit from the mixer, please spend a few minutes familiarizing yourself
with all of the controls and setup procedures outlined in this user guide.
For further information, please refer to the additional details available on our website, or contact our
Product Support team
www.allen-heath.com/xonepx5 http://support.allen-heath.com
Warranty ........................................................
3
Introduction ...................................................
4
Contents ........................................................
5
Packed Items ..................................................
6
Setup Examples .............................................
7
Rear Connectors ..........................................
9
Mic / USB / Line Input, Channel A .............
12
Phono / USB / Line Input, Channels 1 - 4
13
Cross-fader ....................................................
15
Headphone Section ......................................
16
Master Section ..............................................
17
Voltage Controlled Filter Section ..............
18
XONE:FX Control Section Overview .....
19
FX Library Reference ..................................
21
BPM Detection ..............................................
22
Xone:Sync ......................................................
23
Driver Installation (PC) ...............................
26
USB Soundcard (Defaults) ..........................
28
MIDI Control .................................................
29
MIDI Note Implementation ........................
35
Connecting X:Link Controllers .................
36
Timecode Setup; Traktor Scratch Pro 2 ...
37
Recording a Mix; Traktor Scratch Pro 2 ...
40
Block Diagram ...............................................
42
Specifications .................................................
42
Panel Drawings ..............................................
44
Filter Reference ............................................
46
Operating Levels ...........................................
47
Earthing...........................................................
48
Replacing the Faders ...................................
49