ALLEN
&
HEATH
17 AP10733_1_XONE:PX5 User Guide
MASTER SECTION
3
MIX / Monitor Meters
The main meters follow the selected monitor source.
The default display is the mix level, pre-master level,
which is overridden with an input channel level if the
channel cue switch is selected.
In SPLIT cue mode, the left (L) MIX meter displays the
cued channel signal level and the right (R) MIX meter
displays mix bus levels. Cued MIX audio level is pre-
MASTER, to prevent mismatch due to position of the
MASTER level control.
NOTE:
The mixer should be operated with meters averaging
around 0 and loudest peaks between +6 and +9.
If the ! indicator lights, ensure GAIN or EQ settings are
not clipping Channel meters and, if necessary, turn
Channel GAIN, EQ, or FADERS down to prevent LR
MIX meters clipping.
For more information, please refer to the Operating
Levels section on page 47.
1
MASTER Level Control
A rotary MASTER control adjusts the level of the main,
MASTER 1 and MASTER 2, rear panel outputs feeding
the house sound system.
This does not affect BOOTH output level or the meters.
2
BOOTH Level Control
Adjusts the level of the signal to the stereo BOOTH
RCA output. This does not affect the headphones level.
BOOTH output can be used for a DJ Booth monitor, or
as an additional zone feed or recording output.
4
EXT RTN Level Control
Adjusts the level of audio input from effects hardware
connected via FX SEND / EXT RTN and routed to the
XONE:VCF or LR MIX outputs.
3
1
2
4
