ALLEN
&
HEATH
51 AP10733_1_XONE:PX5 User Guide
REPLACING THE FADERS continued
Step 5:
With care, unplug 4, grey, flat harnesses and 1, orange, wire-form connecting the main top panel
PCBA to the PCBA fixed to base of the mixer chassis, following the order shown below;
The top panel can now be lifted away and separated from the chassis.
Place the top panel face-down on a clean surface, taking care not to damage harnesses.
NOTE: when re-assembling the mixer, take great care to refit harnesses in correct positions
and to ensure that connectors are fully fitted into their corresponding sockets.
[
2
]
[
1
]
[
4
]
[
3
]
[
5
]
[
3
]
[
4
]
[
1
]
[
2
]
[
5
]
