Allegion Schlage D Series, Руководство пользователя

Страница: 83 / 573

Key control procedures: end user controlled systems
Schlage • Primus service manual • 23
Key control procedures: end user controlled systems
Signature verification
Authorization for the end user levels is performed at the
Schlage Key Control Center. The dealer is responsible for
submitting the end user’s signed forms to Schlage with each
order.
Primus signature card
The Primus Signature Card is found at the back of this
manual and should be used to register each project and its
authorized signatories with the factory.
The dealer should complete the form with the end user (job)
name, street address and zip code. The zip code is used to
maintain the varying degrees of geographical exclusivity
offered at the end user levels.
There is space for up to five authorized signatures on the
signature card. All signatures will have equal authority to
order locks, keys, key blanks and cylinders unless otherwise
noted. The signature at the top of the list has authority to add
and delete signatures from the card, so it is important that
the appropriate person is the top signer.
Primus face sheet form
The Primus Face Sheet form is located in the back of this
manual and is required for every Primus or Primus XP factory
order.
Levels 3, 4 and 9 are the highest levels of key control. For
this reason, no faxed or photocopied signatures will be
accepted by the Primus Key Control Center.
It is permissible to fax or photocopy the blank forms in order
to speed up the authorization process when the end user has
no blank forms. However, once the page is signed it becomes
an original and cannot be faxed or photocopied, then
submitted for an order.
It is also possible to order a supply of blank forms at no
charge using the following form numbers:
Signature Card MS-E130
Face Sheet MS-E120