Allegion Schlage D Series, Руководство пользователя

Страница: 569 / 573

28 • Schlage • A-Series service manual
Parts and Accessories
Lubrication
A-Series lock mechanisms are designed for durability and seldom need servicing. During assembly, those points of contact
which require lubrication for ease of operation are given on application of high quality petroleum based grease. A touch of
graphite is applied to the pin tumbler plug during assembly of the cylinder unit. No further servicing should be required for an
extended period except where locks are subjected to extremely heavy traffic. Also, if located in particularly dusty or dirty
areas, the grease may become contaminated resulting in a slow or otherwise unsatisfactory operation. The case mechanism
should then be cleaned in a non-corrosive petroleum solvent and relubricated. Graphite only should be applied to the
cylinder unit by blowing a small quantity into the keyway.
Î
Note: Precautionary measures according to solvent manufacturers instructions should always be followed.
Installation Tools and Kits
Boring jig and tools are designed to provide fast and accurate lock installation. Complete kit
contained in a heavy gage metal box, or individual tools can be ordered for preparing doors
and jambs for Schlage products.
For A, AL, B, D, F, H, and S200-series locks. Adjustable for 2
C\,
" and 2
C\v
" backsets. Designed
for special high speed hexagonal shank boring bits and equipped with an adaptor to form an
integrated unit for boring doors 1B\zn" to 1ZB\zn" thick.
Part No. Description
40-148 Installation JIG
M504-497 Case Only
40-176
2 Z\, " Multi Spur Bit
40-177
1 Z\x " Multi Spur Kit
40-030
1 Z\, " x 2 C\v " Strike Chisel
40-032
1 Z\, " x 2 Z\v " Latch Chisel
40-175 1" Bit
40-178 Quick Change Bit Adapter
40-179 1" Strike Locator
40-029 Full Lip Strike Chisel
40-031
1
Z\,
" x 2
Z\v
" Latch Chisel
40-147
Installation Kit
M504-271
Pin Wrench
For depressing knob catches on
A and D-Series locks.