ALL-O-MATIC APS1000-12, Руководство пользователя

Страница: 22 / 24

Battery discharged
charger fault/battery connection fault
APS series inverter
check charger, and check and make sure
battery connection is correct
main
too many devices connected
connected motor’s current draw
exceeds inverter power
motor current draw at start is huge, 3-4 times.
you need inverter with higher wattage
There isn’t enough ventilation to cool
the inverter. keep batteries separated from eachother
inverter overload
charger fault/charger battery select
switch in wrong battery setting
set the “battery select” switch to correct
battery setting
no output
voltage
power switch in wrong position set power switch to power ON (down position)
wire connections are incorrect
inverter is damaged
not charging
inverter battery selector in wrong setting select the correct battery chemistry
wire connections are incorrect
inverter is not in AC mains mode turn ON AC mains to switch to AC mode
panel switch is on power saver “ON” turn panel switch to power “ON” (down position)
fan stopped
running
check if something is blocking the fan
Open the inverter and find a white prove cable
(on cooling fan). Keep it at short-circuit, the fan
should run. If not, then there’s a problem with
the fan.
Check inside inverter
Note: APS1000-12 and APS2000-24 inverter’s fan starts to run when temperatures reach 122-140º F