ALL-O-MATIC APS1000-12, Руководство пользователя

Страница: 10 / 24

Please follow steps below in case battery cables need to be replaced:
1. Install battery ring terminals on recommended cable and terminal size.
2. Connect battery pack as unit requires. APS1000-12 must have batteries connected in
parallel, and the APS2000-24 in series.
NOTE: Please only use Sealed Lead Acid or Sealed GEL/AGM Lead-Acid Batteries.
3. Connect ring terminals of battery cable into inverter battery connector and make sure
bolts are tightened. Make sure polarity is correct at both ends of the cable (battery
terminals and inverter connectors) and that ring terminals are tightly screwed to battery
terminals.
+
+
+
+
+
- -
-
-
-
APS1000-12 Main battery bank, 12VDC.
(35Ahr
included ) wired in parallel.
APS2000-24 Main battery bank, 24VDC.
(50Ahr
included ) wired in series.
PARALLEL
SERIES
+
+
- -
12V
24V
12V
35Ahr
12V
35Ahr
12V
50Ahr
12V
50Ahr