Alkin W3 Series, Инструкция по эксплуатации и перечень запасных частей

Страница: 44 / 83

W 3 S E R I E S
H I G H P R E S S U R E B R E A T H I N G A I R C O M P R E S S O R
©ALKIN Kompresör Sanayi ve Ticaret Limited Şirketi
39
6.5 EXCESSIVE OIL CONSUMPTION

Restricted air intake
Replace air filter element

Oil leaks
Tighten bolts and fittings; replace gaskets.

Worn piston rings
Replace piston rings

Low oil viscosity
Drain oil; refill with oil of proper viscosity

Piston rings misassembled
If piston rings are upside down, install in proper position.

Compressor tilted too much
Level compressor

Scored or worn cylinder(s)
Replace cylinders.
6.6 OIL IN DISCHARGE AIR

Restricted air intake
Replace air filter element; check for other restrictions at the
inlet.

Worn piston rings
Replace piston rings

Excessive oil in the crankcase
Drain to the overflow level

Low oil viscosity
Drain oil; refill with oil of proper viscosity (see
recommended oils )

Piston rings misassembled
If piston rings are upside down, install in proper position;
check ring gap
6.7 COMPRESSOR VIBRATES

Mounting bolts are loose
Tighten the mounting bolts

Compressor not properly mounted
Level the compressor so that all feet touch the floor.

Motor sheave & the flywheel misaligned Align.
6.8 AIR BLOWING OUT OF INLET

Broken first stage inlet valve Replace valve strip or disc
6.9 INSUFFICIENT AIR AT THE POINT OF USE

Leaks or restrictions
Check for leaks and restrictions in the piping and hoses.

Restricted air intake
Replace the intake air filter element.

Slipping belts
Tighten the belts

Abnormal Interstage Pressures
Check the interstage pressures and replace the valve where
the pressure is abnormal

Excessive air consumption
a. Limit the air consumption to the capacity of the
compressor.
b. Increase your air capacity with an additional compressor
unit.
6.10 PRESSURE VESSELS DO NOT HOLD THE PRESSURE WHEN THE COMPRESSOR IS
UNLOADED

Faulty check valve.
Relieve the vessel pressure and replace the check valve.

Excessive leaks in the plant piping
Relieve the tank and piping air pressure; repair leaks.
Warning!
Do not service tank, valves, piping etc. With air/gas in the system. Relieve alla ir before attemting
any repairs.