Alitronika DVS AT88IP, Руководство пользователя

Страница: 9 / 21

Step 6:
Setting the DVB-ASI output parameters.
The DVB-ASI output of AT88IP is completely independent of the DVB-T2/T/C input.
This port is a device on its own.
It could be configured as follows :
1- It could be turned off altogether.
2- It can be used as DVB-T2/T/C to DVB-ASI converter to convert the incoming transport stream to be used for
example as input of a decoder or a modulator. It could be used to monitor the incoming transport stream or any
other function.
3- It could also be used as an independent DVB-ASI output of TS over IP converter.
A completely different transport stream could be ported out of this output.
Another use for it could for example be to port the input DVB-T2/T/C transport stream after some processing
such as Multiplexing, Re-Multiplexing, PID filtering, Trans-coding, Logo inserting.
In such a case the TS enters the system via the IP network, processing is carried out on it & is send out as a
new transport stream via IP network to be used elsewhere is the system.
© 2017 Alitronika DVS AT88IP www.alitronika.com